Abstract
Investigations into the compositional model of the Earth, particularly the atypical concentrations of volatile elements within the silicate portion of the early Earth, have attracted significant interest due to their pivotal role in elucidating the planet’s evolution and dynamics. To understand the behavior of such volatile elements, an established ‘volatility trend’ has been used to explain the observed depletion of certain volatile elements. However, elements such as Se and Br remain notably over-depleted in the silicate Earth. Here we show the results from first-principles simulations that explore the potential for these elements to integrate into hcp-Fe through the formation of substitutional alloys, long presumed to be predominant constituents of the Earth’s core. Based on our findings, the thermodynamic stability of these alloys suggests that these volatile elements might indeed be partially sequestered within the Earth’s core. We suggest potential reservoirs for volatile elements within the deep Earth, augmenting our understanding of the deep Earth’s composition.
Similar content being viewed by others
Introduction
Investigations of compositional models of the Earth offer a route to understanding the evolution, dynamics and early history of our planet1,2. For example, during Earth’s core segregation, an important event early in Earth’s history, some elements (siderophile, iron-loving) tended to be assimilated into the metallic core, while others (lithophile, rock-loving) remained largely within the silicate mantle3,4,5,6,7,8. For those elements with weak to moderate siderophile tendencies and high condensation temperatures, core-mantle partitioning is clearly delineated, as they are observed in consistent ratios both in the silicate Earth and the chondritic reference9. However, concentrations of other volatile elements are less well-matched, showing depletions in the silicate Earth with respect to the chondritic reference.
In view of the high-temperatures prevalent during core-formation, volatility is an important factor for the retention of elements throughout the accretion and core-formation process10,11,12,13. A known ‘volatile trend’ line is well established and has been used to explain the abundances of elements in the silicate Earth, with the general observation that the lower the condensation temperature of an element, the greater depletion in the solid Earth12. However, by comparing the abundance of the elements with their approximate position in the trend line, some elements appear excessively depleted in the silicate Earth, such as Se and Br, suggesting depletion could be attributed to a combination of both volatility and dissolution or assimilation into the core14,15,16,17. However, the underlying mechanism of the incorporation of these apparently lithophile elements into the Earth’s core remain unresolved from simple considerations of their physical and chemical properties.
It is essential to understand the reactions between liquid iron and non-siderophile or volatile elements under high pressures, since the entire primordial Earth was expected to be molten during core-mantle differentiation13. However, computational simulations of such conditions are extremely challenging, and more attention has, therefore, been paid to the study of reactions between solid iron and elements depleted in the silicate earth, e.g. Xe, which is relevant to the understanding of the inner core crystallization after core-mantle differentiation18. Recent studies, interestingly, reported the finding of a chemical reaction trend of Fe and p-block elements by using ab initio structure prediction method under high pressures, and their results show a negative correlation between binding strength with Fe and the depletion of the elements19. It is noted that in most scenarios associated with depletion due to assimilation in the core, the depleted elements are expected to partition into the metallic (iron) core as a low solute concentration of iron20,21,22,23,24. Moreover, it is generally supposed that the wave velocities observed in seismic data from the core imply an inner core density lower than that of pure iron25,26,27. This suggests the existence of ‘light’ elements as the major alloying candidates within it, such as H, C, O, S and Si22,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42.
In this work, we perform simulations on the reactions between iron and non-siderophile and volatile elements by forming substitutional Fe alloys, where the latter elements were treated as impurities via substitutional incorporation onto Fe sites in hcp-Fe supercells. Remarkably, our results reveal that the abundances of non-siderophile and volatile elements in the silicate Earth are positively correlated to the formation enthalpies of these Fe alloys at high pressures, which suggests the likelihood of incorporating such elements into the core. In these reactions, pressure plays a critical role in dramatically altering the thermodynamic stability of these Fe alloys, where lithophile or chalcophile elements tend to become siderophile on increasing pressure. Also, our calculations of elastic properties of the Fe alloys suggest that doping depleted elements into hcp-Fe will decrease shear velocity VS at the inner core pressure, especially for heavy elements, a possibility that has not been fully considered in previous studies that have attempted to explain the density deficit in Preliminary Reference Earth Model (PREM).
Results
Stabilities of Fe alloys
As has been discussed previously9, the elements that appear depleted in the silicate Earth can be ordered in terms of their 50% condensation temperatures at 10−4 bar, and in terms of their siderophilicities (Table S1). Since the depleted elements with high siderophilicity or low volatility can be presumed to have been sequestered within the deep Earth during the core segregation, here, we focus on the non-siderophile elements with moderate and high volatility (shown in green in Table S1), which are represented in Fig. 1. We have investigated their formation enthalpies upon alloying into hcp-Fe at high pressures. Furthermore, we have also included additional elements which are not volatile, such as P and Ge, as shown in Table S1 and Fig. S1, to investigate their possible alloying propensity with Fe at high pressures. In all, we have selected around 40 different elements relevant to the silicate Earth and calculated their enthalpies of formation upon alloying into hcp-Fe at 20, 150 and 300 GPa (Fig. S1). The rationale for selecting these elements to alloy with Fe, rather than forming compounds, is that their quantities are insufficient to generate Fe-compounds with high stoichiometric ratios in the deep Earth. To assess the simulation size employed in our calculations, we conducted simulations using supercells of 54 atoms, as depicted in Fig. S2. Our results indicate that the trend remains consistent regardless of the doping concentration of the depleting elements. Our simulations suggest that pressure can significantly enhance the stability of these Fe alloys, even if some of these impurity atoms exhibit lithophile or chalcophile tendencies at ambient pressures. As Fe gradually accretes into the center of the Earth (pressure increases), the formation enthalpies of these pressure-promoted reactions become lower, so that more elements are available to alloy with hcp-Fe. In view of the high temperatures of the deep Earth, we recognize that entropy may play an important role in these reactions. The geotherm of the Earth suggests temperatures of 2000 K, 4000 K and 6000 K (in TSconf) correspond to pressures of 20 GPa, 150 GPa and 300 GPa, respectively, (Fig. S3)43. Elements locate in shaded areas in Fig. S3 represent alloys with negative ΔH-TΔSconf, showing that these reactions should proceed spontaneously at the corresponding temperatures and pressures. By comparing Fig. S1 with Fig. S3, high temperature has a positive effect on these reactions, which promotes the alloying processes mentioned above.
Among the elements selected in our simulations, we have selected the non-siderophile elements with moderate and high volatility (Fig. 1). As the pressure increases, more alloys become thermodynamically stable, suggesting some non-siderophile elements gradually tend to form alloys with Fe spontaneously. The shaded areas reflect that the relation between abundance of elements and their thermodynamic stabilities alloying with hcp-Fe shows a negative trend, especially at pressures of 150 and 300 GPa. In other words, the binding strengths of these elements alloying with Fe, as quantified by the formation enthalpies, are strongly correlated with their depletion in the silicate Earth. This trend is consistent with the hypothesis that the depletion of these non-siderophile and volatile elements could also be considered by accretion into the inner core as substitutional defects of hcp-Fe. Some elements, such as S, Se and Te, have been shown to become more siderophile with increasing pressure44. In Fig. 1, the formation enthalpies of alloys Fe127S, Fe127Se and Fe127Te decrease significantly (~ 0.05 eV/atom) as the pressure increases from 20 to 300 GPa. Our simulations are thus in agreement with the previous results44, which is also a validation of computational scheme of the current study. Our calculations also show that the depletion of several elements, including F, K and Rb, is not likely associated with their assimilation into the Earth’s core. Furthermore, we noticed that, with increasing pressure, the formation enthalpies of several alloys, such as Fe127Li and Fe127B, decrease slightly (~0.02 eV/atom), indicating that the siderophilicities of these impurity elements will not change significantly during core segregation. It is worth noting that these elements are plotted on the ‘volatile trend’ line as shown in previous work, which is consistent with the current findings that their depletion could plausibly be ascribed to volatility24. Our calculations provide an explanation for the storage of these non-siderophile and volatile elements in the Earth’s interior.
Fe alloys with p-block elements
By summarizing the formation enthalpies of these alloys, we found that the Fe alloys with p-block elements are typically thermodynamically stable, as shown in Fig. 2. The formation enthalpies of the p-block alloys for groups IIIA, IVA, VA and VIA increase with the impurity elements from top to bottom of the periodic table, which can be explained by the electronegativity differences between each element and Fe45. As observed in Fig. 2, the formation enthalpy behaviors of the halogens (F, Cl and Br) and noble gases (Ne, Ar, Kr and Xe) decrease with increasing mass, which is related to their high electronegativities under both ambient and high pressure. According to the Hume-Rothery rules, for substitutional solid solutions, the solute and solvent should have similar electronegativity. If there is a large difference of the electronegativity between two elements, the metals tend to form intermetallic compounds instead of solid solutions. For halogens and noble gases, their electronegativities are much higher than Fe at relative low pressures, leading to positive formation enthalpies at 20 and 150 GPa. With increasing pressure, the electronegativity differences between Fe and impurity atoms gradually decreased, and their alloys thus tend to be stable. The lighter halogen atom has a higher electronegativity, leading to a larger difference with Fe, and the behavior of formation enthalpy for the halogens moves down in the periodic table. Furthermore, due to the higher electronegativity of light halogens and noble gas atoms, they are less likely than the heavy atoms to alloy with Fe, which might offer an explanation for the gradual decrease in formation enthalpies of halogens and noble gases when moving down in the periodic table.
Electronic properties of Fe-alloys
In order to explore any distinctive electronic features of our proposed Earth core Fe-alloys, Bader charge analyses were conducted to evaluate the charge transfer between Fe atoms and impurity atoms in the systems, as shown in Fig. 346. For most impurities with relatively low ΔH alloys (before Co), the charge of Fe atoms in their alloys remains negative from 20 to 300 GPa, indicating a weaker electronegativity than Fe. The Bader charges of three thermodynamically stable alloys with positively charged iron, Fe127P, Fe127S and Fe127Se, decrease with the increasing pressure, showing the trend of Fe being an oxidant (electron acceptor). For another two alloys, Fe127As and Fe127Te, the charge on Fe changes from positive to negative with increasing pressure, suggesting that the relative electronegativity between Fe and these elements might be switched under pressure and it is more prone to form thermodynamically stable Fe alloys with negatively charged iron at high pressures.
Wave velocities of Fe alloys
Finally, we take 13 elements of potential alloying with Fe at high pressure as representative systems (P, S, As, Ge, Se, Te, Si, Sb, Ga, Br, Sn, Cl and Bi) to investigate the elastic constants of the expected structures (Table S4). These elements are selected from Fig. S3, which includes a wide range of elements. The Fe alloys with these elements have the lowest formation enthalpies at 300 GPa, as shown in Table S3, indicating that they could be potentially stored in the Earth’s inner core, based on our results. According to the density deficit between pure Fe and PREM (~10% at outer core and 3.6% at inner core boundary)47,48,49, the doping proportion of elements with heavier relative atomic mass than Fe (heavy-elements) should be low, so that high density should be compensated without the need for a large concentration of elements lighter than Fe (light-elements). We first calculated the elastic constants of the model Fe127X structures and compared computed values with those of pure Fe. The calculated shear wave velocities VS, primary wave velocities VP, bulk wave velocities Vϕ and Possion’s ratios are shown in Fig. 4a, Fig. S4, S5 and S6, respectively. Intriguingly, the results show that the incorporation of different elements will reduce the VS of pure Fe, but to significantly different degrees. We attribute this result to a slight lattice distortion of hcp-Fe after substituting Fe with other atoms. Lattice distortion could reduce the shear modulus of the alloys (Fig. S7), which further reduces VS according to equation 4. Thus, owing to this effect, VS will be reduced regardless of which elements are doped. For ‘heavy’ impurities, the effect of density will aggravate this reduction of VS, converse to typical expectations. To evaluate the doping effect on shear wave velocities of these alloys, we have calculated VS of Fe alloys with either light-elements or heavy-elements up to about 2 wt% (Fig. 4b). As the doping concentration increases, the VS of the alloys linearly decreases. The structures of these model systems with different concentrations are shown in Fig. S8.
Discussion
The densities, wave velocities and compressibility of iron-rich alloys under high P–T conditions, compared with observed seismic models, such as PREM, serves as an important constraint on the Earth’s core composition27. Previous studies have primarily focused on ‘light’ elements, as candidate impurities of the Fe alloys24. Our results suggest that certain light and heavy elements, which are non-siderophile and volatile, could be potentially become captured into the Earth’s core during metal–silicate segregation, to enrich the chemical composition of the core. Based on the relationship between static wave velocities and high temperature VS in the systems Fe-C, Fe-O and Fe-Si reported previously20,47, the static VS for the elements shown in Fig. 4 could be extrapolated to high temperatures. The S-wave velocities in the inner core observed from seismology (~3.7 km/s) are lower than pure hcp-Fe obtained from experimental and theoretical results (~4.5 km/s)27. To extrapolate our static findings to elevated temperatures, we compared the calculated VS of pure hcp-Fe with that of Fe alloys in previous works at high temperatures and 0 K in Fig. S9. The data from previous studies (dashed lines) suggest that ‘light’ atoms are likely to soften the static VS of hcp-Fe, and this effect remains similar at elevated temperatures. This trend indicates that the doping of ‘heavy’ elements we have considered at 0 K (red open squares) in Fig. 4a may have the potential to decrease VS of hcp-Fe at high temperatures. As doping concentrations increase, the static VS of the alloys linearly decreases (Fig. 4b), suggesting that high temperature VS of Fe alloys may be decreased due to doping of these heavier impurity atoms. Our current findings thus suggest the estimation of the concentration of ‘light’ elements within the Earth’s mantle as well as the Earth’s core remain an open challenge.
In conclusion, we have performed computational simulations on the possible incorporation of a range of elements into the Earth’s core, by considering the thermodynamic stabilities of corresponding Fe alloys. At high pressure, many elements, that are typically assumed lithophile or chalcophile, may combine with Fe, with the formation enthalpies of these Fe alloys decreasing with increasing pressure. Among these alloys, we found that the abundances of non-siderophile and volatile elements are positively correlated with the formation enthalpies of these Fe alloys at high pressures, consistent with the inference that depleted non-siderophile elements might be stored in the core as impurities substituted in the hcp-Fe. In addition, by analyzing the electronic properties of the range of alloys considered here, we noticed that in those with relatively low formation enthalpies, Fe tends to be an oxidant at pressures above 20 GPa. Furthermore, our static wave velocity calculations show that both light and heavy elements have a weakening effect compared to that of pure Fe, due to small lattice distortions upon substitution, and this effect intensifies with increasing doping concentration.
Methods
In this work, we performed ab initio computational simulations with models containing up to 128 atoms (a 4 × 4 × 4 hcp supercell), in which 1-6 impurity atoms are substituted into the supercell (Fig. S8). These models with different impurity concentrations were used to simulate the Fe alloys during the formation of the Earth’s core. The impurities were chosen to take substitutional sites instead of interstitial sites due to the relatively large atomic radii of these elements (the list of elements and their atomic radii are shown in Table S5). In order to verify the stability of the substitutional model structures at high temperatures, we conducted molecular dynamics simulations on the substitutional and interstitial models (Fe127As1, Fe128As1, Fe124As4, and Fe128As4) under Earth’s inner core conditions (333 GPa for Fe127As, 340 GPa for Fe124As4, 345 GPa for Fe128As and 330 GPa for Fe128As4 at 6000 K), as shown in Fig. S10. In these simulations, there is a diffusion behavior for Fe atoms in the interstitial alloy model, which indicates a liquid state of the system and substitutional alloy structures are thus much better in further simulations for the understanding of Earth’s inner core. The simulations on the structure geometry optimization are based on the framework of density functional theory48,49. The exchange correlation function was chosen as Generalized Gradient Approximation Perdew-Burke-Ernzerhof 50,51 by employing projector-augmented wave method52 as implemented in the VASP code53. We choose energy cutoff of 1000 eV and k-point sampling of 2π × 0.03 Å−1 in the Brillouin zone54,55. We have performed additional simulations to explore any influence of the spin-polarized effect for Fe. Our results show that there is no spin polarization for Fe over a pressure range of 20–300 GPa (Table S2). To estimate the relative thermodynamic stabilities, we employed the hcp supercell of Fe127X (X represents the defective elements as shown in Fig. S8a) at 20, 150 and 300 GPa and 0 K with the following formula:
where \(\Delta H\) is the formation enthalpy per atom and H is the calculated enthalpy per chemical unit for each compound. For defective systems, the configurational entropy Sconf is estimated by the following formula:
where kB is the Boltzmann constant (1.380649 × 10−23 J/K) and m is the defect concentration.
The elastic constants were calculated using the stress–strain method. Voigt average scheme where the strain is taken to be uniform was carried out to determine the shear modulus (G), bulk modulus (B) and density (ρ) of the alloys, which proved more appropriate and accurate in calculating the seismic wave properties.
The primary wave velocity VP, shear wave velocity VS and bulk wave velocity Vϕ are:
Possion’s ratio was calculated from:
Data availability
The main data generated in this study are provided in the Supplementary Information, Source Data file as well as Figshare. Source data are provided with this paper.
Code availability
The code for first-principles-related simulations is a commercial code and can be found at https://www.vasp.at/ (VASP).
References
Jones, J. H. & Drake, M. J. Geochemical constraints on core formation in the Earth. Nature 322, 221 (1986).
Wood, B. J. & Halliday, A. N. Cooling of the Earth and core formation after the giant impact. Nature 437, 1345 (2005).
Allègre, C. J., Poirier, J. P., Humler, E. & Hofmann, A. W. The chemical composition of the Earth. Earth Planet. Sci. Lett. 134, 515 (1995).
Li, J. & Agee, C. B. Geochemistry of mantle–core differentiation at high pressure. Nature 381, 686 (1996).
Wade, J. & Wood, B. J. Core formation and the oxidation state of the Earth. Earth Planet. Sci. Lett. 236, 78 (2005).
Wood, B. J., Wade, J. & Kilburn, M. R. Core formation and the oxidation state of the Earth: Additional constraints from Nb, V and Cr partitioning. Geochim. et. Cosmochim. Ac. 72, 1415 (2008).
Wade, J., Wood, B. J. & Tuff, J. Metal–silicate partitioning of Mo and W at high pressures and temperatures: evidence for late accretion of sulphur to the Earth. Geochim. Cosmochim. Acta 85, 58 (2012).
Wood, B. J. Accretion and core formation: constraints from metal–silicate partitioning. Philos. Trans. R. Soc. A 366, 4339 (2008).
McDonough, W. F. & Sun, S.-s The composition of the Earth. Chem. Geol. 120, 223 (1995).
Wang, Z. & Becker, H. Ratios of S, Se and Te in the silicate Earth require a volatile-rich late veneer. Nature 499, 328 (2013).
Wood, B. J., Smythe, D. J. & Harrison, T. The condensation temperatures of the elements: A reappraisal. Am. Mineral. 104, 844 (2019).
Lodders, K. Solar system abundances and condensation temperatures of the elements. Astrophys. J. 591, 1220 (2003).
Wood, B. J., Walter, M. J. & Wade, J. Accretion of the Earth and segregation of its core. Nature 441, 825 (2006).
Dreibus, G. & Palme, H. Cosmochemical constraints on the sulfur content in the Earth’s core. Geochim. Cosmochim. Acta 60, 1125 (1996).
McDonough, W. F. in Treatise on Geochemistry 2nd edn Vol. 3 (eds Holland, H. D. and Turekian, K. K.) 559 (Elsevier, 2013).
Lin, J. F. et al. Magnetic transition and sound velocities of Fe3S at high pressure: implications for Earth and planetary cores. Earth Planet. Sci. Lett. 226, 33 (2004).
Li, J., Fei, Y., Mao, H. K., Hirose, K. & Shieh, S. R. Sulfur in the Earth’s inner core,. Earth Planet. Sci. Lett. 193, 509 (2001).
Zhu, L., Liu, H., Pickard, C., Zou, G. T. & Ma, Y. M. Reactions of xenon with iron and nickel are predicted in the Earth’s inner core. Nat. Chem. 6, 644–648 (2014).
Wang, X. et al. Reverse chemistry of iron in the deep Earth. Preprint at https://arxiv.org/abs/1908.06569 (2019).
He, Y. et al. Superionic iron alloys and their seismic velocities in Earth’s inner core,. Nature 602, 258 (2022).
Tateno, S., Hirose, K., Ohishi, Y. & Tatsumi, Y. The structure of iron in Earth’s inner core. Science 330, 359 (2010).
Badro, J. et al. Effect of light elements on the sound velocities in solid iron: Implications for the composition of Earth’s core. Earth Planet. Sci. Lett. 254, 233 (2007).
Hu, Q. et al. FeO2 and FeOOH under deep lower-mantle conditions and Earth’s oxygen-hydrogen cycles. Nature 534, 241 (2016).
Hirose, K., Wood, B. & Vočadlo, L. Light elements in the Earth’s core,. Nat. Rev. Earth Environ. 2, 645 (2021).
Birch, F. Elasticity and constitution of the Earth’s interior. J. Geophys. Res. 57, 227 (1952).
Sakamaki, T. et al. Constraints on Earth’s inner core composition inferred from measurements of the sound velocity of hcp-iron in extreme conditions. Sci. Adv. 2, e1500802 (2016).
Dziewonski, A. M. & Anderson, D. L. Preliminary reference Earth model. Phys. Earth Planet. Inter. 25, 297 (1981).
Mao, Z. et al. Sound velocities of Fe and Fe-Si alloy in the Earth’s core,. Proc. Natl Acad. Sci. 109, 10239 (2012).
Lin, J. F., Heinz, D. L., Campbell, A. J., Devine, J. M. & Shen, G. Iron-silicon alloy in Earth’s core?,. Science 295, 313 (2002).
Lin, J. F. et al. Nabil Boctor and Russell J. Hemley, Sound velocities of iron‐nickel and iron‐silicon alloys at high pressures. Geophys, Res. Lett. 30, 21 (2003).
Antonangeli, D. et al. Composition of the Earth’s inner core from high-pressure sound velocity measurements in Fe–Ni–Si alloys,. Earth Planet. Sci. Lett. 295, 292 (2010).
de Koker, N., Steinle-Neumann, G. & Vlcek, V. Electrical resistivity and thermal conductivity of liquid Fe alloys at high P and T, and heat flux in Earth’s core,. Proc. Natl Acad. Sci. 109, 4070 (2012).
Alfe, D., Gillan, M. J. & Price, G. D. Composition and temperature of the Earth’s core constrained by combining ab initio calculations and seismic data,. Earth Planet. Sci. Lett. 195, 91 (2002).
Terasaki, H. et al. Liquidus and solidus temperatures of a Fe-O-S alloy up to the pressures of the outer core: Implication for the thermal structure of the Earth’s core. Earth Planet. Sci. Lett. 304, 559 (2011).
Morard, G. et al. Fe-FeO and Fe-Fe3C melting relations at Earth’s core-mantle boundary conditions: Implications for a volatile-rich or oxygen-rich core,. Earth Planet. Sci. Lett. 473, 94 (2017).
Chen, B. et al. Hidden carbon in Earth’s inner core revealed by shear softening in dense Fe7C3,. Proc. Natl. Acad. Sci. 111, 17755 (2014).
Prescher, C. et al. High Poisson’s ratio of Earth’s inner core explained by carbon alloying,. Nat. Geosci. 8, 220 (2015).
Mashino, I., Miozzi, F., Hirose, K., Morard, G. & Sinmyo, R. Melting experiments on the Fe-C binary system up to 255 GPa: Constraints on the carbon content in the Earth’s core. Earth Planet. Sci. Lett. 515, 135 (2019).
Gao, L. et al. Sound velocities of compressed Fe3C from simultaneous synchrotron X-ray diffraction and nuclear resonant scattering measurements. J. Synchrotron Rad. 16, 714 (2009).
Nakajima, Y. et al. Thermoelastic property and high-pressure stability of Fe7C3: Implication for iron-carbide in the Earth’s core. Am. Mineral. 96, 1158 (2011).
Shibazaki, Y. et al. Sound velocity measurements in dhcp-FeH up to 70 GPa with inelastic X-ray scattering: Implications for the composition of the Earth’s core. Earth Planet. Sci. Lett. 313, 79 (2012).
Caracas, R. The influence of hydrogen on the seismic properties of solid iron. Geophys. Res. Lett. 42, 3780 (2015).
Anzellini, S., Dewaele, A., Mezouar, M., Loubeyre, P. & Morard, G. Melting of iron at earth’s inner core boundary based on fast X-ray diffraction. Science 340, 464 (2013).
Weston, L. R., Brenan, J. M., Fei, Y., Secco, R. A. & Frost, D. J. Effect of pressure, temperature, and oxygen fugacity on the metal-silicate partitioning of Te, Se, and S: Implications for earth differentiation. Geochimica et. Cosmochimica Acta 73, 4598 (2009).
Dong, X., Oganov, A. R., Cui, H., Zhou, X. F. & Wang, H. T. Electronegativity and chemical hardness of elements under pressure. Proc. Natl. Acad. Sci. 119, 10 (2022).
Bader, R. F. W. Atoms in molecules. Acc. Chem. Res. 18, 9 (1985).
Martorell, B., Wood, I. G., Brodholt, J. & Vočadlo, L. The elastic properties of hcp-Fe1-xSix at Earth’s inner-core conditions. Earth Planet. Sci. Lett. 451, 89 (2016).
Hohenberg, P. & Kohn, W. Inhomogeneous electron gas. Phys. Rev. 136, B864 (1964).
Kohn, W. & Sham, L. J. Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133 (1965).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1996).
Perdew, J. P. et al. Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation. Phys. Rev. B 46, 6671 (1992).
Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953 (1994).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set,. Phys. Rev. B 54, 11169 (1996).
Birch, F. Density and composition of mantle and core. J. Geophys. Res. 69, 4377 (1964).
Fei, Y., Murphy, C., Shibazaki, Y., Shahar, A. & Huang, H. Thermal equation of state of hcp-iron: Constraint on the density deficit of Earth’s solid inner core. Geophys. Res. Lett. 43, 6837 (2016).
Acknowledgements
This work was supported by the National Key Research and Development Program of China (Grant No. 2022YFA1402304), National Natural Science Foundation of China (Grant No. 12074138, 52288102, and 52090024), Program for Jilin University Science and Technology Innovative Research Team (2021TD–05), Jilin Province Science and Technology Development Program (Grant No. YDZJ202102CXJD016), the Program for Jilin University Computational Interdisciplinary Innovative Platform, the Fundamental Research Funds for the Central Universities and computing facilities at the High-Performance Computing Center of Jilin University. The authors thank Prof. Yanming Ma for valuable discussions.
Author information
Authors and Affiliations
Contributions
H.L. designed the research. Y.T. performed theoretical work. W.Z. and X.F. contributed comments. Y.T., P.Z., S.A.T.R. and H.L. wrote the paper. All authors contributed to discussing the results and writing the paper.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous, reviewers for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Tian, Y., Zhang, P., Zhang, W. et al. Iron alloys of volatile elements in the deep Earth’s interior. Nat Commun 15, 3320 (2024). https://doi.org/10.1038/s41467-024-47663-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-47663-0
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.